Welcome to IEEE-PEMC 2022

It is our great pleasure to announce the 20th IEEE International Power Electronics and Motion Control Conference (IEEE-PEMC 2022) to be held September 25-29, 2022 in Brasov, Romania, and I’m proud to invite you to such an event, which is the first in Romania.
The conference is sponsored by IEEE-Industrial Electronics and IEEE-Industry Applications.
The conference is a continuation of the Power Electronics and Motion Control International conference series organized in previous years by PEMC Council. In last decades, the IEEE PEMC Conference (previously named PEMC and EPE-PEMC) has become the largest and most important conference on Industrial Electronics and Motion Control in Central and Eastern Europe. The 50th Anniversary of PEMC Series was celebrated during IEEE-PEMC 2020 in Gliwice, Poland. Many excellent scientists and engineers affiliated to academic, research and industrial centers from Europe and whole world attend PEMC conferences every time.
The IEEE-PEMC 2022 is organized by Transilvania University of Brasov, Romania, which is a large technical university top-ranked in Romania, with 18 faculties, 720 academic staff, over 16000 bachelor students, 3500 master students and 460 doctoral students (
The conference will be held in the heart of Europe, in the industrial and very modern region of Transilvania. I hope that the location of the conference, will attract participants from all over the world and enrich the scientific diversity.
The conference language is English. Accepted papers will be submitted for inclusion into IEEE Xplore subject to meeting IEEE Xplore’s scope and quality requirements.
On behalf of the Scientific and Organizing Committees we look forward to welcoming you to Brasov!

Mihai Cernat and Dan Lascu, General Co-Chairs
on behalf of the organizing committee


PEMC Council Chair

Pavol Bauer, Netherlands

PEMC Council Co-chairs

Peter Korondi, Hungary,

Viliam Fedak, Slovakia,

Krzysztof Zawirski, Poland

Honorary Chair

Carmen Gerigan, Romania

General Co-chairs

Mihai Cernat, Romania
Dan Lascu, Romania

Technical Program Chair

Gabor Sziebig, Norway

Financial Co-chairs

Yousef Ibrahim, Australia

Carmen Gerigan, Romania

Special Sessions Chair

Viliam Fedak, Slovakia

Tutorial Chair

Frede Blaabjerg, Denmark

Publicity Co-chairs

Diana-Ileana Nicolae, Romania

Cosmin Balaban, Romania

Industry liaison Chair

Dan Lascu, Romania

Publication Chair

Razvan-Ioan Dinita, UK

Call for paper

Important date

Draft paper submission deadline
Draft paper acceptance notification
Final paper submission deadline

2022 IEEE 20th International Power Electronics and Motion Control Conference (IEEE-PEMC 2022) is the biennial conference initiated by the PEMC Council, focusing on contemporary research topics of power electronics, controls, electrical drives, robotics and related topics. This exciting event connects researchers and industry experts to share ideas and experiences surrounding frontier technologies, breakthrough and innovative solutions and applications. 

Submission Topics

TT01 – Power Electronic Converter Topologies, Design and Control

TT02 – Power Electronics in Transportation (Road, Aerospace, Marine and Railway Vehicles, Electric and Hybrid Vehicles)

TT03 – Power Electronics in Smart Grid Technologies, Applications and Policies

TT04 – Power Electronics in Electrical Energy Generation, Transmission and Distribution

TT05 – Power Electronics in Renewable Energy Systems, Power Supplies

TT06 – Electrical Machines and Actuators

TT07 – Motion Control, Adjustable Speed Drives and Robotics, Mechatronics

TT08 – Sensors, Measurement and Observation Technique

TT09 – Active Filtering, and Unity Power Factor Correction

TT10 – Semiconductor Devices Modeling, Packaging and Integration

TT11 – Education

Possible Special Sessions and/or subjects Invited papers

Electrification in Transportation

Wireless power transfer

Advanced Topologies and Control Techniques for Multilevel Converters

Magnetic Design, Implementation and Analysis for Next Generation Power Converters

Advanced Technologies for DC Microgrid Plug and Play Operations

PV Systems and other Distributed Energy Resources in Grids: Challenges, Monitoring, and Power Quality Assessment

Emerging Topics in More Power Electronics Grid

Advanced Technologies Based Fully Renewable Power Generation

Wireless Charging of Electric Vehicles

Sensorless Control Issues of Electrical Drives and Machines

Advanced Control of Grid Connected Inverters for Power Quality and Renewable Energy Integration

Energy Storage Systems for Resilience and Robustness Improvement in Smart Grid and Electric Mobility

Portable and Smart Solution of Power Electronics for High Voltage Conversion with Renewable Energy and Grid Integration

Challenges and Solutions Towards Fully Power Electronic Converter Based Power Systems

Internet of Things (IoT) and Wireless Sensors

High Power Converters: Topologies, Modulation Techniques, and Applications

Charging Electric Vehicles from Renewable Energy and Ultrafast Charging of EV

Fault Tolerant Converters for Medium and Low Voltage Applications


Author’s Kit – Paper Submission System

General instructions for authors

Papers must be written in English. Full paper length (up to 6 proceedings pages), including figures, are allowed for each paper. Papers should follow the IEEE double-column format (A4 size).

Standard IEEE conference templates are found here:

Detailed guidelines for creating manuscripts are found here:

Authors should only submit original work that has neither appeared elsewhere for publication, nor is under review for another refereed publication. The conference will verify the originality of manuscripts by comparing them with millions of other articles in databases worldwide. Manuscripts that violate IEEE’s publication principles may be rejected. If the violation is deemed severe, then disciplinary actions may also be taken by IEEE. Before submission, please familiarize yourself with the following IEEE authorship guidelines and policies:

First step: Paper Proposal submission

A full paper proposal describing work not previously published or presented have to be electronically submitted in PDF file through the conference website no later than the deadline. The paper must be written in English UK or English US. Normally, the paper proposal should be 6-8 pages long (maximum 10 pages can be also admitted), two-column, single-space, on A4 format with supporting figures, tables and references, headed by title of paper and choice of topic category.

The submitted paper proposal will be reviewed via a peer review process in order to ensure the highest technical quality of the conference. The paper proposal should clearly define the salient concepts and novel features of the work. Be sure to mention past or previous works to distinguish your originality from them (papers will be checked against plagiarism using a specialized software).

Notification of Acceptance

Authors will be notified by e-mail about the paper acceptance.

Templates: Manuscript Templates for Conference Proceedings

Second step, after paper acceptance: Final Paper submission

All full papers and signed copyright must be uploaded by above deadline. All authors must also register and pay the fee by indicated deadline. If you have not received your email with your paper’s status, please login on your account and check under “Paper Submission” to view the results and reviews for your paper.

For the final paper, the reviewer’s comments (eventually) received in the notification e-mail have to be taken into account. The correctness of the English language has to be carefully checked.

IEEE is very strict about the requirements for converting application files or PostScript files to full-text PDF for inclusion in IEEE Xplore®. Please follow the detailed instructions in “IEEE PDF File Preparation Guide for IEEE Xplore®”, which describes the essential steps in distilling PDFs that meet IEEE requirements.

The most important issue is to make sure that all fonts used in the paper are EMBEDDED, especially for papers from Asia and Europe. The “IEEE PDF File Preparation Guide for IEEE Xplore®” details the process to ensure that all fonts used are embedded and subsetted. Failure to embed and subset fonts is the biggest obstacle to PDF compliance with IEEE Xplore®. Papers failing to meet IEEE Xplore® PDF requirements may be rejected.

We encourage authors to check their final papers for IEEE compliance using the IEEE PDF eXpress system  before they are submitted. Please go to and create an account (or if you already have one from previous conferences use the existing one to log in) and use the Conference ID50812X. After logging in, you have to create a new title for each paper you have and you can either check your pdf file using the Submit PDF for checking option or create a compliant PDF from the source file using the Submit Source Files for Conversion. If your PDF file fails the check you can always Try again after fixing the issues from the PDF Check Report. If all checks are passed you can then proceed to upload your final manuscript.

For more information about PDF eXpress, please consult the related documentation: Using IEEE PDF eXpress®

Formatting rules

Papers are limited to ten (10) A4 sized sheets, and must conform to IEEE double column format. Submissions exceeding 10 pages will be rejected.

Do NOT insert any headers, footers, or page numbers.

Submit Comment
Verify Code Change Another
All Comments
Important Date
  • Conference Date

    Sep 25



    Sep 28


  • Apr 15 2022

    Draft paper submission deadline

  • Jun 15 2022

    Draft Paper Acceptance Notification

  • Jul 15 2022

    Final Paper Deadline

Sponsored By
Institute of Electrical and Electronics Engineers
Industrial Electronics Society
IEEE Industry Applications Society
Transilvania University of Brasov
Organized By
Transilvania University of Brasov