Introduction

The scientific program of the ICCC 2024 conference is divided into the following areas, which will run in parallel sessions:

  • Measurement, sensors, monitoring, and diagnostic systems.
  • Identification, modeling, and simulation of processes and systems.
  • Theory and application of control systems.
  • Automation, mechatronics, robotics.
  • Intelligent embedded systems and instrumentation.
  • Information systems (SCADA/HMI, GIS, MES) and their Internet support.
  • Engineering application of informatics.
  • Quality control systems (TQM), production management, and industrial logistics.
  • Engineering education in control and computer systems.
  • Fractional calculus and its applications.
  • Hydraulic and pneumatic drives.
  • Biomechanics and rehabilitation engineering.
  • Industry 4.0
  • Vibration control
Committee

COMMITTEES

Chair

Agata Nawrocka IEEE, AGH University of Krakow (PL)

Honorary Chairs:

Bogdan Sapiński IEEE, AGH University of Krakow (PL)
József Vásárhelyi IEEE IAS, University of Miskolc (HU)
Karol Kostúr Technical University of Košice (SK)
Radim Farana Mendel University in Brno (CZ)

Co-chairs:

Renata Wagnerova VŠB-Technical University of Ostrava (CZ)
Marek Laciak Technical University of Košice (SK)
Dan Popescu IEEE, University of Craiova (RO)
Attila Trohák University of Miskolc (HU)

Publication Chairs

Andrzej Kot IEEE, AGH University of Krakow (PL)

International Program Committee

Orlando Arrieta University of Costa Rica (COSTA RICA)
Marek Babiuch VSB-Technical University of Ostrava (CZ)
Costin Bădică University of Craiova (RO)
Áron Ballagi Szechenyi Istvan University (HU)
Lucian-Florentin Barbulescu University of Craiova (RO)
Andrzej Bartoszewicz Technical University of Lodz (PL)
Pavol Bauer IEEE IAS, Netherlands (NL)
Filip Beneš VSB – Technical University of Ostrava (CZ)
Rabab Benotsmane University of Miskolc (HU)
Eugen Bobasu IEEE, University of Craiova (RO)
Zdeno Bobovský VSB-Technical University of Ostrava (CZ)
István Bodnár University of Miskolc (HU)
Ahmed Bouzid Polytechnique Montréal (CA)
Mehmet Bozca Technical University of Yildiz (TR)
Sándor Tihamér Brassai Sapientia Hungarian University of Transylvania, Cluj Napoca (RO)
Marius Brezovan University of Craiova (RO)
Petru Caşcaval ‘Gheorghe Asachi’ Technical University of Iasi (RO)
Dorian Cojocaru University of Craiova, Faculty of Automation, Computers and Electronics (RO)
László Czap IEEE, University of Miskolc (HU)
Samad Dadvandipour University of Miskolc (HU)
Daniela Danciu University of Craiova (RO)
Paweł Drąg Wrocław University of Science and Technology (PL)
Daniel Drótos University of Miskolc, Hungary (HU)
Eva Dulf IEEE, Technical University of Cluj-Napoca (RO)
Milan Durdán Technical University of Kosice (SK)
František Dušek University of Pardubice (CZ)
Kazimierz Dzierżek Bialystok University of Technology, Bialystok (PL)
Miroslav Fikar Slovak University of Technology in Bratislava (SK)
Patrik Flegner Technical University of Kosice (SK)
Dénes Fodor IEEE, Szechenyi Istvan University (HU)
Zsófia Forgács University of Miskolc (HU)
Janusz Gołdasz Cracow University of Technology (PL)
György Györök Obuda University, ARTF (HU)
Milan Hofreiter Czech Technical University in Prague (CZ)
Mária Imecs Technical University of Cluj (RO)
Dejan Ivezić University of Belgrade (SRB)
Dagmar Janáčová University of T. Bata in Zlín (CZ)
Károly Jármai University of Miskolc (HU)
Zsolt Csaba Johanyák John von Neumann University, GAMF Faculty of Engineering and Computer Science, Department of Information Technology (HU)
Jan Kačur Technical University of Kosice (SK)
András Kelemen Sapientia Hungarian University of Transylvania, Cluj Napoca (RO)
Jarosław Konieczny IEEE, AGH University of Krakow (PL)
Andrzej Kot IEEE, AGH University of Krakow (PL)
Szilveszter Kovács University of Miskolc (HU)
László Kovács University of Miskolc (HU)
Tamás Kovácsházy Budapest University of Technology and Economics (HU)
Štefan Kozák Slovak Technical University of Bratislava (SK)
Dušan Krokavec Technical University of Kosice (SK)
Marek Laciak Technical University of Kosice (SK)
Lenka Landryová VSB-Technical University of Ostrava (CZ)
Florin Leon ‘Gheorghe Asachi’ Technical University of Iasi (RO)
Ciprian Lupu Politehnica University of Bucharest (RO)
Marius Marian IEEE, University of Craiova (RO)
Paolo Mercorelli Leuphana University (DE)
Liviu Miclea Technical University of Cluj-Napoca (RO)
Andrea Mojžišová Technical University of Kosice (SK)
Agata Nawrocka IEEE, AGH University of Krakow (PL)
Bizdoaca Nicu University of Craiova (RO)
Mircea Nitulescu University of Craiova, Faculty of Automation, Computers and Electronics (RO)
Petr Noskievič VŠB-Technical University of Ostrava (CZ)
Sorin Olaru Centrale Supelec (FR)
István Oniga University of Debrecen (HU)
Stepan Ozana VSB-TU Ostrava (CZ)
Octavian Păstrăvanu Technical University of Iasi (RO)
Nicolae Patrascoiu  University of Petrosani (RO)
Marcela Pavlíčková Technical University of Kosice (SK)
Ewa Pawluszewicz Bialystok University of Technology, Bialystok (PL)
Gábor Péceli Budapest University of Technology and Economics (HU)
Crescenzo Pepe Università Politecnica delle Marche (IT)
Ivo Petráš IEEE, Technical University of Kosice (SK)
Igor Podlubný IEEE, Technical University of Košice (SK)
Dan Popescu University of Craiova (RO)
Elvira Popescu University of Craiova (RO)
Radu-Emil Precup Politehnica University of Timisoara (RO)
István Preitl Politehnica University of Timisoara (RO)
Waldemar Rączka IEEE, AGH University of Krakow (PL)
Vladimir Răsvan University of Craiova (RO)
Bartók Roland Univeristy of Miskolc, Hungary (HU)
Monica Roman University of Craiova (RO)
Tamas Ruzsanyi IEEE IAS, Ganz-Skoda Electric Ltd, Hungary (HU)
Bogdan Sapiński IEEE, AGH University of Krakow (PL)
Balázs Scherer Budapest University of Technology and Economics (HU)
Milos Šeda Brno University of Technology (CZ)
Dan Selișteanu University of Craiova (RO)
Dorin Şendrescu University of Craiova (RO)
Marek Sibielak IEEE, AGH University of Krakow (PL)
Dominik Sierociuk Warsaw University of Technology (PL)
Zoltán Siménfalvi University of Miskolc Faculty of Mechanical Engineering and Informatics (HU)
Andrzej Sioma IEEE, AGH University of Krakow (PL)
Tomáš Škovránek IEEE, Technical University of Košice (SK)
Florin Stîngă University of Craiova (RO)
László Sujbert Budapest University of Technology and Economics (HU)
Jozsef Sütő University of Debrecen (HU)
Jiří Švub VŠB-TU Ostrava (CZ)
Loránd Szabó Technical University of Cluj Napoca (RO)
Marco Temperini Sapienza University of Rome (IT)
Ján Terpák Technical University of Košice (SK)
Attila Trohák University of Miskolc (HU)
Jiří Tůma VŠB-Technical University of Ostrava (CZ)
Andrzej Urbaniak Poznań University of Technology (PL)
Honoriu Valean Technical University of Cluj Napoca (RO)
Attila K. Varga University of Miskolc (HU)
József Vásárhelyi IEEE, University of Miskolc (HU)
János Végh Kalimános Bt. Hungary (HU)
Vojtech Vesely Slovak University of Technology (SK)
Ramon Vilanova Universitat Autònoma Barcelona (CAT)
Blas M Vinagre University of Extremadura (ES)
Antonin Víteček VSB-Technical University of Ostrava (CZ)
Miluse Vítečková VSB-Technical University of Ostrava (CZ)
Tomáš Vyhlídal Czech Technical University in Prague (CZ)
Renata Wagnerová VSB-Technical University of Ostrava (CZ)
Silvia Maria Zanoli Dip. Ingegneria dell’Informazione – Unv. Politecnica delle Marche (IT)
Peiyi Zhu School of Electrical and Automatic Engineering Changshu Institute of Technology (CH)

Organizing committee

Aneta Biernat AGH University of Krakow (PL)
Beata Dulińska AGH University of Krakow (PL)
Andrzej Kot AGH University of Krakow (PL)
Mateusz Kozioł AGH University of Krakow (PL)
Bartosz Lenty AGH University of Krakow (PL)
Dorota Marszalik AGH University of Krakow (PL)
Agata Nawrocka AGH University of Krakow (PL)
Adam Smoter AGH University of Krakow (PL)
Call for paper

Important date

2023-12-22
Draft paper submission deadline
Submit Comment
Verify Code Change Another
All Comments
Important Date
  • Conference Date

    May 22

    2024

    to

    May 24

    2024

  • Dec 22 2023

    Draft paper submission deadline

Sponsored By
AGH University, Faculty of Mechanical Engineering and Robotics
Department of Process Control, AGH University of Krakow
IEEE Industry Applications Society